Author Topic: Burnside Pumper  (Read 63605 times)

Offline Jimmy_91

  • Forum Senior Firefighter
  • ***
  • Posts: 93
  • Karma: +0/-0
    • View Profile
    • Southern Yorke CFS Group
Re: Burnside Pumper
« Reply #25 on: February 18, 2008, 02:27:26 PM »
Tatra sounds asian. but i could be wrong,  they could be fricken awesome....but ill stick to my racist comment.

Have a look here http://ausfire.fotopic.net/c995895_1.html for pics of a Tatra Demonstration Fire Appliance. :wink:
Stewart Germaine
Minlaton CFS

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #26 on: February 18, 2008, 02:59:08 PM »
that really is ... CRANK!  very much a American urban appliance morphed into a Urban/Rural fire appliance with almost too much water onboard!!  (if thats 5.4 meaning 5000L)
« Last Edit: February 18, 2008, 03:01:00 PM by ZIPPY28 »

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #27 on: February 18, 2008, 04:57:01 PM »
Sorry to ask but where does it come from?
cheers
Ken
just another retard!

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #28 on: February 18, 2008, 05:05:14 PM »
Western Australia Fire service...OOPS...sorry, New south Wales :P
« Last Edit: February 18, 2008, 05:07:37 PM by ZIPPY28 »

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #29 on: February 18, 2008, 05:13:22 PM »
Is it Aust made?
Ken
just another retard!

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Burnside Pumper
« Reply #30 on: February 18, 2008, 05:24:09 PM »
Christ. Trust the filtered bushwhackers in the NSWRFS to try to buy a Czech built truck. Its almost as bad as importing a second hand UK truck...

Chook, Tatra is a Czech Republic based Truck manufacturer.
« Last Edit: February 18, 2008, 05:43:07 PM by 6739264 »
To think they employed me as a drooling retard...

Offline Cameron Yelland

  • Forum Lieutenant
  • ****
  • Posts: 425
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #31 on: February 18, 2008, 05:29:00 PM »
Its almost as bad as importing a second hand UK truck...


That deserves 10 points right there...  :lol: :lol: :lol:
Compton CFS Brigade
Captain
(Formally Comp00)

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #32 on: February 18, 2008, 05:33:02 PM »
Thanks Numbers, hadn't heard the name before. Wonder why they even bother trialling it.
cheers
Ken
just another retard!

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Burnside Pumper
« Reply #33 on: February 18, 2008, 05:44:38 PM »
If we're not careful the CFS will try to import an old Shand Mason pump  :evil:
« Last Edit: February 18, 2008, 06:30:51 PM by 6739264 »
To think they employed me as a drooling retard...

sesroadcrashrescue

  • Guest
Re: Burnside Pumper
« Reply #34 on: February 18, 2008, 06:39:29 PM »
zippy i hope that was your way of joking about the truck cause it doesnt come from NSW look at the number plates 

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #35 on: February 18, 2008, 06:46:37 PM »
The Isuzu is NSWRFS. Other the coming from the former Soviet Union, is there anything else wrong with them?
Ken
just another retard!

Offline 6739264

  • Forum Captain
  • *****
  • Posts: 1,806
  • Karma: +0/-0
  • RETARD RETARD RETARD Need I say more?
    • View Profile
Re: Burnside Pumper
« Reply #36 on: February 18, 2008, 07:14:25 PM »
SESRCR did you read or look at any of the pictures?

"Tatra Demonstration Fire Appliance, proposed by an importer of the Tatra trucks in WA. The truck was with the Kuringgai Braigade when these images were captured."

Its was at a NSWRFS station for evaluation.
To think they employed me as a drooling retard...

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #37 on: February 18, 2008, 09:15:36 PM »
Quote
zippy i hope that was your way of joking about the truck cause it doesnt come from NSW look at the number plates

read 678969696969ner's comment.

Offline Alan J

  • Forum Lieutenant
  • ****
  • Posts: 516
  • Karma: +0/-0
  • Certified Flamin' Nuisance
    • View Profile
Re: Burnside Pumper
« Reply #38 on: February 19, 2008, 12:01:12 PM »
Thanks Numbers, hadn't heard the name before. Wonder why they even bother trialling it.
cheers

I get the impression Tatra actually do quite a good truck. Never mistake Czechs or Slovaks for Russian or even Russian quality of manufacture.  Their country was an unwilling member of the old Soviet Union. Their manufacturing & industrial tradition is more like Germany. (Haven't heard anyone slinging off at Mercs lately) Since the Iron Curtain came down, Tatra has been selling quite well against Scania, Merc, Iveco, Fiat & etc. in Western Europe. 

The vehicle was in SA briefly a year or so ago - was spotted onto the Ozfire group.

The chassis is well worth looking at if only for interest' sake, and the extra water might make it an even better option than 34 or 34P's for many brigades.


Alan J.
Cherry Gdns CFS

Data isn't information.  Information isn't knowledge. 
Knowledge isn't wisdom.

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #39 on: February 19, 2008, 12:13:12 PM »
Thanks mate, checked out their website - heavy duty military trucks. The chassis system looks very good for off road.
People need to remember that the 4x4 fleet you currently have (Isuzu, Hino) are really an on road truck with a front diff. For true off road capability then some thing like this may be the ticket, Mann produce heavy off road capability, the Unimog wouldn't have the capacity, so you are starting to run out of options.
Anyway as I said the chassis system looks impressive.
Be interesting to see if the NSW RFS picks them up.
cheers
Ken
just another retard!

Offline Alan J

  • Forum Lieutenant
  • ****
  • Posts: 516
  • Karma: +0/-0
  • Certified Flamin' Nuisance
    • View Profile
Re: Burnside Pumper
« Reply #40 on: February 20, 2008, 12:31:26 PM »
Here's some footage of stuff they didn't teach us at Brukunga off-road course:
http://www.offroadtrucks.com.au/tatrainaction.php

enjoy!
or cringe...
Alan J.
Cherry Gdns CFS

Data isn't information.  Information isn't knowledge. 
Knowledge isn't wisdom.

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #41 on: February 20, 2008, 01:30:05 PM »
Looks Good - GVM of 19 Tonne?
Awsome of road capability.
Thanks cheers
Ken
just another retard!

Offline bittenyakka

  • Administrator
  • *****
  • Posts: 1,342
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #42 on: February 20, 2008, 01:37:49 PM »
that looks like an awesome truck bet it comes with a price tag to match tho

Offline jaff

  • Forum Captain
  • *****
  • Posts: 848
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #43 on: February 20, 2008, 02:06:00 PM »
Now that the stuff we'd like get and to ,bet the truck would handle the speed bumps down in Burnsides patch ,no problems :-D

Cheers Jaff
Just Another Filtered Fireman

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #44 on: February 20, 2008, 04:21:08 PM »
The drive tube system is similar to the Unimog except the Tatra has the suspension mounted on the tube as well instead of coils on the end of the half shafts (axles). The Unimogs are awesome off road but poor load carrying capacity.
Wonder what the top speed of the Tatras are?
Anyway they should be cheaper than anything comparable (Unimog, Mann & the American stuff). Good luck trying to get one but, wonder if they will put a rescue pod on one. Should do speed humps alright Jaff.
cheers
Ken
just another retard!

Offline Alan J

  • Forum Lieutenant
  • ****
  • Posts: 516
  • Karma: +0/-0
  • Certified Flamin' Nuisance
    • View Profile
Re: Burnside Pumper
« Reply #45 on: February 20, 2008, 06:45:56 PM »
wonder if they will put a rescue pod on one. Should do speed humps alright Jaff.
cheers

<shrug> there'd probably be something suitable available ex-Czech Republic. Possibly even second-hand from Mother Russia. Maybe even get several per truck including troopie, field ambulance, mobile work-shop, command post & rocket launcher (to assist CFSVA/SESVA negotiating position...) 

Alan J.
Cherry Gdns CFS

Data isn't information.  Information isn't knowledge. 
Knowledge isn't wisdom.

Offline chook

  • Forum Captain
  • *****
  • Posts: 1,191
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #46 on: February 20, 2008, 06:53:23 PM »
I like your thinking :-D While I was on the Varley site they had a photo of a rebuilt Merc 911 appliance, a Mack & Unimog - they bought back happy memories(can't believe they rebuit the Mergs though!).
But your right of course there would be plenty of options around for a rescue body for the Tatra.
It would depend on the COST though.
cheers
Ken
just another retard!

Offline TillerMan

  • Forum Lieutenant
  • ****
  • Posts: 396
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #47 on: February 22, 2008, 07:58:34 AM »
Did somebody say that tatra thing is crank, no way, i don't think you people understand the word crank... maybe if it was an FDNY tiller.

Offline Zippy

  • Global Moderator
  • *****
  • Posts: 2,540
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #48 on: February 22, 2008, 09:16:50 AM »
hehe tillerman..Its just looks to be a good rural build truck.

Offline bittenyakka

  • Administrator
  • *****
  • Posts: 1,342
  • Karma: +0/-0
    • View Profile
Re: Burnside Pumper
« Reply #49 on: February 22, 2008, 02:55:13 PM »
doesn't crank just mean big awesome and something you wish you had in your station?

 

anything