SA Firefighter

Equipment => All Equipment discussion => Topic started by: David on November 05, 2010, 05:57:18 AM

Title: New CFS Village Pumper
Post by: David on November 05, 2010, 05:57:18 AM
Off topic slightly, has anyone heard of a 'village pumper'.  What is it how big etc.  At our last group meeting we were led to believe Birdwood would be getting one sometime in the next 18 mths.
On other news Barossa group is finally getting a tanker, 13000 litre at that, in the next couple of weeks.  It's been a good year out here for new vehicles. :-D
Title: New CFS Village 14
Post by: rescue5271 on November 05, 2010, 06:10:35 AM
Yes its just about to hit the road and will be tested in regions was built by TASFIRE its a crew cab 14 and will be good for those brigades in the hills that have very narrow street's.  So keep a eye out for it as it will be going every where for testing...
Title: New CFS Village 14
Post by: Shiner on November 05, 2010, 07:35:52 AM
I recall there was something about it and a couple of photos on Arthurs latest Infralog newsletter but can't find where I put it at the minute........
Title: Re: New CFS Village Pumper
Post by: rescue5271 on November 05, 2010, 09:30:51 AM
Looks a little like eden hills 14 cafs
Title: Re: New CFS Village Pumper
Post by: 6739264 on November 05, 2010, 10:18:16 AM
Fantastic! Just like the Type 2 Pumper, the CFS are adopting a naming scheme for an appliance straight from an interstate fire service that has NO relevance to the SACFS.

Keep the good work I&L! You really deserve that paycheck!
Title: Re: New CFS Village Pumper
Post by: vsteve01 on November 05, 2010, 11:18:44 AM
is this the one?

http://www.safirefighter.com/boards/index.php?topic=2597.0 (http://www.safirefighter.com/boards/index.php?topic=2597.0)

Or more pics at:

http://www.ozfire.org/forums/showthread.php?t=17051 (http://www.ozfire.org/forums/showthread.php?t=17051) (Rego required to view the pics)
Title: Re: New CFS Village Pumper
Post by: COBB on November 05, 2010, 12:20:57 PM
Saw this one during the week in the western suburbs. Looks to have a nice finish to it. Still needed to be stowed when I saw it.
Whilst designated as a '14' it looks to be a significantly physically larger unit than the current Mitsi Canter's. Bit hard to judge without having them side by side. Hopefully will carry the weight better than the Canters.
On looks & finish I'd take one if offered.
Title: Re: New CFS Village Pumper
Post by: pumprescue on November 05, 2010, 04:15:21 PM
I think the pumper tag is a little misleading, its certainly no pumper in the sense we view a pumper as.

Its simply a 14 with better stowage and BA.

I don't see how it would be relevant to Birdwood, haven't seen to many narrow streets in Birdwood.

It would be of excellent use to the likes of Stirling, Aldgate, Basket Range, Piccadilly etc who have narrow streets and lanes and need some urban firefighting capacity, either is a first response, or support to the main pumper for areas you can't get to.

But I am sure the end user has no idea what they are talking about and we will see them in places that are on the flat and need bulkwater.....

Title: Re: New CFS Village Pumper
Post by: rescue5271 on November 06, 2010, 08:55:13 AM
I guess we should all just wait till its in your region/group then go and have a playing with it see what it can or can not do.
Title: Re: New CFS Village Pumper
Post by: JJD on November 06, 2010, 09:40:02 AM
Firstly, its no narrower than a 14, which is the appliance type it is superceeding. The idea isnt for places with narrow streets, but areas which could do with a second appliance which is larger than a QRV but still significantly smaller than a 34 or 34p.

Size wise it is similar to the mitsi 14s not 100% sure but water is up around 1500-1600lts.

The "pumper" tag is irrevelant here, it will be designated a 14. Pumper comes from the tasfire designation, where any truck carrying BA is a pumper. Yes, it has stowage for BA.

The appliance, last i heard, will be based from birdwood while in the trial/prototype period, being taken to other brigades/groups/regions for weeks at a time for demonstrations and trials.

Yes its the same appliance from the last infralog.
Title: Re: New CFS Village Pumper
Post by: tft on November 06, 2010, 10:26:44 AM
Something from  TFS engineering, about time.
Title: Re: New CFS Village Pumper
Post by: Zippy on November 06, 2010, 10:55:36 AM
Real Pumpers are outright PTO driven...that is all.

I must say, for a 14 appliance, its a step up, the pump is logical this time...

Thank goodness there's no 'tank fill', the most dangerous piece of plumbing on newer heavy tankers.

It'd be great for the Riverland, on dual response with a BWC.
Title: Re: New CFS Village Pumper
Post by: ftstn on November 06, 2010, 08:43:28 PM

The "pumper" tag is irrevelant here, it will be designated a 14. Pumper comes from the tasfire designation, where any truck carrying BA is a pumper. Yes, it has stowage for BA.

If they kept the TFS tank size (which i am sure thet did it is 1600l)

Also I have never heard them refered to as a pumper, What TFS do differentiate though are the type of stowage on the appliance its either Urban or Rural,
Title: Re: New CFS Village Pumper
Post by: rescue5271 on November 07, 2010, 04:51:59 AM
They are a 1600lt tank which is a step up from the 14's, can see this being of great use to brigades in all areas of the state, nice to see at long last CFS is taking the appliances out to all regions for testing...
Title: Re: New CFS Village Pumper
Post by: boredmatrix on November 08, 2010, 04:39:11 PM
Off topic slightly, has anyone heard of a 'village pumper'. 


YMCA 14??
Title: Re: New CFS Village Pumper
Post by: SA Firey on November 14, 2010, 12:31:18 PM
Off topic slightly, has anyone heard of a 'village pumper'. 


YMCA 14??

If they send it to some places "village pumper" will be appropriate :lol:
Title: Re: New CFS Village Pumper
Post by: misterteddy on November 14, 2010, 03:51:41 PM
I'm sure there are plenty of willing volunteers to man it in those places... Make sure you get a t-card so they can be tracked down later....saves on phone calls  :-D
Title: Re: New CFS Village Pumper
Post by: Fire000 on November 14, 2010, 04:17:01 PM

Thank goodness there's no 'tank fill', the most dangerous piece of plumbing on newer heavy tankers.


Why is the tank fill so dangerous?
Title: Re: New CFS Village Pumper
Post by: Alan (Big Al) on November 14, 2010, 07:18:42 PM
i suppose if the pumpy isnt on his game it can be easy enough to use more water than you have coming in, where as if you run it through an inlet through the pump and out you cant use more than you are getting? 
Title: Re: New CFS Village Pumper
Post by: pumprescue on November 23, 2010, 06:09:40 AM
Why would you use the tank fill in any other situation than to fill the tank when going to and from a fire ground, should never be used for stationary pumping, there is no way to control the in coming flow, unless you go to the hydrant and turn it off.

If your pulled up and working at a job go through the inlets.

Not that hard is it ?
Title: Re: New CFS Village Pumper
Post by: Alex on November 23, 2010, 11:00:30 PM

Not that hard is it ?


Except for the fact that most brigades dont train that way, and most drivers/pumpies dont bother to know there appliances and pumps properly. Laziness is the key factor here.
Title: Re: New CFS Village Pumper
Post by: pumprescue on November 24, 2010, 05:53:12 AM
Yeah good point, most people don't really bother to understand....
Title: Re: New CFS Village Pumper
Post by: Darius on November 24, 2010, 09:09:30 AM
Why would you use the tank fill in any other situation than to fill the tank when going to and from a fire ground, should never be used for stationary pumping, there is no way to control the in coming flow, unless you go to the hydrant and turn it off.

If your pulled up and working at a job go through the inlets.

Not that hard is it ?

maybe I'm misunderstanding here but why can't you just partially shut off the valve on the tank inlet to control the flow of incoming water?  not sure what the big deal is...

in my brigade we usually use this way rather than pump inlet, but i'm talking rural 24, not a pumper, and no hydrants/mains.  Effectively we always use the tank then hook in another appliance / tanker / drafting line to keep the tank filled up.  This ensures a continuous flow of water to the branch, as it's using the tank as a 'buffer', when the incoming water stops eg. cos the 2nd appliance is now empty or have to reposition the drafting line etc.  It also means you get water on the fire immediately while the second crew/truck/person can setup ready for more water. The pump operator adjusts the valve to 'balance' the outgoing and incoming water.
Title: Re: New CFS Village Pumper
Post by: pumprescue on November 24, 2010, 11:02:49 AM
All the new appliances come with a seperate tank fill, which goes into the tank only, and simply has a 1 way valve, no handle or anything like that, so there is no way to control the flow coming in, it is ONLY to be used for filling the tank not when stationary and running from a hydrant in and pumping out.

Very different to the old 24/34 setup.
Title: Re: New CFS Village Pumper
Post by: Darius on November 24, 2010, 11:46:58 AM
ok thanks I understand now, seems an odd setup, but as we're unlikely to get a new appliance anytime in the forseeable future it will all have changed by then I'm sure.
Title: Re: New CFS Village Pumper
Post by: SA Firey on November 24, 2010, 12:33:20 PM
ok thanks I understand now, seems an odd setup, but as we're unlikely to get a new appliance anytime in the forseeable future it will all have changed by then I'm sure.

You never know Dave, your brigade does more than 2 calls a year so there is hope for a new one yet :-D
Title: Re: New CFS Village Pumper
Post by: Alan J on November 27, 2010, 09:18:20 PM
ok thanks I understand now, seems an odd setup,

Been used elsewhere for a long time, but you do need to train driver/operators to only use tank fill off the fire-ground, & use pump inlets for all operational work. Not hard to do. I question whether the supposed laziness is on the part of the operators or the officers/trainers.
Title: Re: New CFS Village Pumper
Post by: 6739264 on November 28, 2010, 07:38:57 AM
I'm still curious as to why 'Tank Fill' exists at all...?

Is it that hard to refill via the collectors and backfill during pumping operations?

As an American comrade once said "and so continues the pussification of the fire service"
Title: Re: New CFS Village Pumper
Post by: Zippy on November 28, 2010, 06:45:36 PM
I'm still curious as to why 'Tank Fill' exists at all...?

Is it that hard to refill via the collectors and backfill during pumping operations?

As an American comrade once said "and so continues the pussification of the fire service"

Numbers, that has to be the word of the day! Pussification...  Everything is being affected by it in life.

The entire first world is becoming lazy, illogical, etc.    We will be begging asia for nutrition one day me thinks...50, 100 years?
Title: Re: New CFS Village Pumper
Post by: bittenyakka on December 01, 2010, 10:29:44 AM
It is a SAwater requerment to prevent us pumping into their mains and breaking stuff.....

YOu would have to be kind dumb to pump down a hydrant... could be fun tho  :-D :-P :-P
Title: Re: New CFS Village Pumper
Post by: misterteddy on December 01, 2010, 11:23:56 AM
It is a SAwater requerment to prevent us pumping into their mains and breaking stuff.....

YOu would have to be kind dumb to pump down a hydrant... could be fun tho  :-D :-P :-P

what???....lmao, thats just about the funniest thing I have heard on this forum  :lol:
Title: Re: New CFS Village Pumper
Post by: pumprescue on December 01, 2010, 12:38:17 PM
Sadly its true, thats what we were told when all 3 trucks we have had with this inlet....
Title: Re: New CFS Village Pumper
Post by: misterteddy on December 01, 2010, 12:44:41 PM
think someone has not one but two hands  engaged, locked and loaded